85
Communication
Remote Mode
Remote mode refers to sending the command from a PC to this instrument while both are connected.
If this instrument is controlled with a PC, “REMOTE MODE” appears on the LCD. While this message is
displayed, key operation of this instrument is not acceptable except for the following cases.
If the measurement button is pressed, measurement starts to forward the data to a PC. (If that
measurement button is in valid mode by transferring the command from a PC to this instrument.
Use the software for spectroradiometers detailed below.)
When
ESC
key is pressed, the remote mode is canceled.
To control this instrument by a PC, use the CS-S30 software for spectroradiometers included in the
standard accessories. For details on CS-S30 specifications and use method, see the CS-S30 instruction
manual.
If you want to use an independent program on a PC to control this instrument, download
Communication Specifications from KONICA MINOLTA’s website at URL below for your reference:
https: //www.konicaminolta.jp/instruments/support/download/index.html
(The above URL is subject to change without notice.)
(If the target page does not appear, please search the site by keywords, “CS-3000” and “download.”)
ESC
key
LCD screen
Measurement button
Memo
Use the USB cable when controlling the instrument with CS-S30.
To Next Page
Loading...
Need help?
General
