21
Installation
Connecting AC Adapter
The AC adapter supplied with this instrument is used for the corresponding power source.
Warning (Failure to adhere to the following points may result in death or serious injury)
Always use the AC adapter and power cord supplied as a standard or optional accessory
(AC-A312G), and connect it to an indoor AC outlet of rated voltage and frequency (100 V
,
50 Hz/60 Hz). Failure to follow either of these may result in damage to the instrument or the
AC adapter, fire or electric shock.
If this instrument is not used for a long time, disconnect the AC adapter from the AC outlet.
Accumulated dirt or water on the prongs of the AC adapter may cause fire. Accumulated dirt
or water on the prongs of the AC adapter may cause fire and should be removed.
When unplugging the power cord of the AC adapter, gently unplug it by holding the power
plug. Do not forcibly pull the power cord when unplugging as this may damage it or cause
fire or electric shock. Also, do not handle the power cord with wet hands. Doing so may cause
electric shock.
Do not forcibly bend, twist or pull the power cord. Also, do not place heavy objects on the
power cord, or damage or modify it. Such actions may cause fire or electric shock due to
damage to the power cord.
Do not disassemble or modify this instrument or the AC adapter. Doing so may cause fire or
electric shock.
Should this instrument or the AC adapter be damaged or emit smoke or an odd smell, do not
keep using such instrument or AC adapter without correction. Doing so may cause fire. In
such situations, immediately switch the power off and unplug the AC adapter, and then
contact the nearest KONICA MINOLTA-authorized service facility.
Caution
(Failure to adhere to following points may result in injury or damage to this instrument or other properties)
Use the instrument near an AC outlet so that the AC adapter can be easily plugged and
unplugged.
To Next Page
Loading...
Need help?
General
