EasyManuals Logo
Home>Konica Minolta>Measuring Instruments>CS-3000HDR

Konica Minolta CS-3000HDR User Manual

Konica Minolta CS-3000HDR
108 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
1
Safety Precautions
To ensure correct use of the instrument, read the following points carefully and adhere to them. After
you have read this manual, keep it in a safe place where it can be referred to anytime a question arises.
Warning
(Failure to adhere to the following points may result in death or serious
injury)
Do not use this instrument in places where flammable or combustible gases (gasoline,
etc.) are present.
Doing so may cause fire.
Do not use this instrument when the inside is dirty with dust that has entered through the
ventilation holes. Doing so may cause fire. For periodic inspections, please contact the
nearest KONICA MINOLTA-authorized service facility.
Always use the AC adapter (AC-A312G) supplied as a standard accessory and connect it to
an indoor AC outlet of rated voltage and frequency (100-240 V
, 50 Hz/60 Hz). Use of an
AC adapter other than the one specified or connection to a different voltage may result in
damage to the instrument, fire or electric shock.
Fully insert the power plug until it is securely seated in the AC outlet. Failure to do so may
result in fire or electric shock.
If this instrument is not used for a long time, disconnect the AC adapter from the AC outlet.
Accumulated dirt or water on the prongs of the AC adapter may cause fire. Accumulated
dirt or water on the prongs of the AC adapter may cause fire and should be removed.
When unplugging the power cord of the AC adapter, gently unplug it by holding the power
plug. Do not forcibly pull the power cord when unplugging as this may damage it or cause
fire or electric shock. Also, do not handle the power cord with wet hands.
Doing so may cause electric shock.
Do not forcibly bend, twist or pull the power cord. Also, do not place heavy objects on the
power cord, or damage or modify it. Such actions may cause fire or electric shock due to
damage to the power cord.
Do not disassemble or modify this instrument or the AC adapter. Doing so may cause fire
or electric shock.
Do not spill liquid on this instrument or drop metallic objects onto it. Doing so may cause
fire or electric shock. Should either of these happen, immediately switch the power off and
unplug the AC adapter, and then contact the nearest KONICA MINOLTA-authorized
service facility.
Should this instrument or the AC adapter be damaged or emit smoke or an odd smell, do
not keep using such instrument or AC adapter without correction. Doing so may cause fire.
In such situations, immediately switch the power off and unplug the AC adapter, and then
contact the nearest KONICA MINOLTA-authorized service facility.
Do not look at the sun or intense light through the finder of this instrument. Doing so may
cause loss of sight.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Konica Minolta CS-3000HDR and is the answer not in the manual?

Konica Minolta CS-3000HDR Specifications

General IconGeneral
BrandKonica Minolta
ModelCS-3000HDR
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals