KTM 1290 Super Duke R 2017 User Manual

10 RIDING INSTRUCTIONS 105
– Apply the brakes on the motorcycle.
– Shift the transmission to idle .
– Switch off ignition - to do this briefly press the Race-on button (maximum of 1 second) with the ignition switched on.
Info
If the engine is switched off with the emergency OFF switch and the ignition remains switched on at the Race-on button, the
power supply to most power consumers remains unbroken. This discharges the battery. You should therefore always switch off
the engine with the Race-on button – the emergency OFF switch is intended for emergencies only.
– Park the motorcycle on a firm surface.
– Swing the side stand forward with your foot as far as it will go and lean the vehicle on it.
– Move handlebar fully to the left and press and hold the Race-on button (for at least 2 seconds).
The steering is locked.
Info
If the handlebar lock does not engage, move the handlebar slightly.
10.11 Transport
Note
Danger of damage The parked vehicle can roll away or fall over.
– Park the vehicle on a firm and level surface.
Note
Fire hazard Hot vehicle components pose a fire hazard and explosion risk.
– Do not park the vehicle near to materials which are highly flammable or explosive.
– Allow the vehicle to cool down before covering it.

KTM 1290 Super Duke R 2017 Specifications

General

Displacement	1301 cc
Bore x Stroke	108 mm x 71 mm
Fuel System	Keihin EFI, 56 mm throttle bodies
Transmission	6-speed
Rear Suspension	WP monoshock
ABS	Bosch 9ME Combined ABS
Front Tire	120/70 ZR 17
Rear Tire	190/55 ZR 17
Seat Height	835 mm
Dry Weight	195 kg
Power	177 hp
Torque	141 Nm
Frame	Chromium-Molybdenum steel trellis frame
Front Suspension	WP Ø 48 mm
Front Brake	Dual 320 mm discs, Brembo 4-piston calipers
Rear Brake	Brembo two-piston caliper, 240 mm disc
Wheelbase	1482 mm
Fuel Tank Capacity	18 liters