7 COMBINATION INSTRUMENT 63
Warning
Danger of accidents When visibility is poor, the daytime running light is not a
substitute for the low beam.
Automatic switching between the daytime running light and low beam may only
be partially available when visibility is significantly impaired due to fog, snow
or rain.
– Ensure that the appropriate type of lighting is always selected.
– If necessary switch off the daytime running lights using the menu before
going on a ride or when stopped so that the low beam is switched on per-
manently.
– Note the legal regulations regarding the daytime running light.
– Press the UP or DOWN button until DRL appears marked on the display. Pressing the SET
button again switches the daytime running light on or off.
7.13.16 Quick Selector 1
K00769-01
Condition
• The drive mode TRACK (optional) is not activated.
• The vehicle is stationary.
– Press the SET button when the menu is closed.
– Press the UP or DOWN button until the Settings menu appears on the display.
– Press the SET button.
– Press the UP or DOWN button until the Quick Selector menu appears on the display.
– Press the SET button to open the menu.
– Press the UP or DOWN button until the Quick Selector 1 menu appears on the display.
– Press the SET button to open the menu.
– Press the UP or DOWN button until the required parameter is marked.