145PERIODIC SERVICE
BChecking Oil Cooler Line
1. Check to see that all lines and hose clamps are tight
and not damaged.
2. If hoses and clamps are found worn or damaged,
replace or repair them at once.
BAdjusting Power Shift
If the power shift is not calibrated, driving will be
uncomfortable.
Consult your local KUBOTA Dealer for this service.
Have the following 5 items calibrated.
1. Main shift clutch [Mode "2"]
2. Master clutch [Mode "3"]
3. Solenoid proportional pressure reducing valve
(Master) [Mode "5"]
4. Solenoid proportional pressure reducing valve (Main
shift L) [Mode "6"]
5. Solenoid proportional pressure reducing valve (Main
shift H) [Mode "7"]
BChecking Air Conditioner Pipe and Hose
1. Check to see that all lines and hose clamps are tight
and not damaged.
2. If hoses and clamps are found worn or damaged,
consult your local KUBOTA Dealer for this service.
EVERY 600 HOURS
BAdjusting Front Axle Pivot
If the front axle pivot pin adjustment is not correct, front
wheel vibration can occur causing vibration in the steering
wheel.
C Adjusting procedure
Loosen the lock nut, screw-in the adjusting screw until
seated, then tighten the screw with an additional 1/6 turn.
Re-tighten the lock nut.
(1) Hose
(2) Hose clamps
(1) Oil cooler line
(1) Adjusting screw
(2) Lock nut
To Next Page
Loading...
Need help?
General
