Kubota M6-101-M6-111 User Manual

147PERIODIC SERVICE
BChanging Front Differential Case Oil
1. To drain the used oil, remove the drain and filling plug
at the front differential case and drain the oil
completely into the oil pan.
2. After draining reinstall the drain plug.
3. Remove the oil level check plug.
4. Fill with the new oil up to the lower rim of check plug
port.
(See "LUBRICANTS" in "MAINTENANCE" section.)
5. After filling reinstall the filling plug and check plug.
BChanging Front Axle Gear Case Oil
1. To drain the used oil, remove the right and left drain
plugs and filling plugs at the front axle gear case and
drain the oil completely into the oil pan.
2. After draining reinstall the drain plugs.
3. Fill with the new oil up to the filling plug port.
(See "LUBRICANTS" in "MAINTENANCE" section.)
4. After filling reinstall the filling plugs.
BAdjusting Engine Valve Clearance
Consult your local KUBOTA Dealer for this service.
Tractor model Oil capacity
M6-101, M6-111 7 L (7.4 U.S.qts.)
M6-131, M6-141 13 L (13.7 U.S.qts.)
(1) Drain plug
(2) Filling plug
(3) Check plug
Tractor model Oil capacity for each side
M6-101, M6-111 3.5 L (3.7 U.S.qts.)
M6-131, M6-141 4.5 L (4.8 U.S.qts.)
(1) Drain plug
(2) Filling plug

Kubota M6-101-M6-111 Specifications

General

Brand	Kubota
Model	M6-101-M6-111
Category	Tractor
Language	English