Lantronix MatchPort User Manual

13: Maintenance and Diagnostics Settings
EDS1100/2100 Device Server User Guide 107
4. Click Submit.
IP Settings
To configure the network protocol settings for IP:
1. Select Protocol Stack on the menu bar.
2. Select IP.
Figure 13-6 IP Protocol
3. Modify the following settings:
Table 13-7 IP Protocol Settings
4. Click Submit.
Max Retrans Enter the maximum number of retransmissions of a packet that will be attempted
before failing.
Max Retrans Syn/Ack Enter the maximum number of retransmissions of a SYN that will be attempted
before failing. It is lower than “Max Retrans” to thwart denial-of-service attacks.
Max Timeout Enter the maximum time between retransmissions.
Protocol Stack
IP Settings
Description
IP Time to Live This value typically fills the Time To Live in the IP header. SNMP refers to this
value as "ipDefaultTTL".
Enter the number of hops to be transmitted before the packet is discarded.
Multicast Time to Live This value fills the Time To Live in any multicast IP header. Normally this value
will be one so the packet will be blocked at the first router. It is the number of
hops allowed before a Multicast packet is discarded.
Enter the value to be greater than one to intentionally propagate multicast
packets to additional routers.
Protocol Stack
TCP Settings
Description

Lantronix MatchPort Specifications

General

Brand	Lantronix
Model	MatchPort
Category	Server
Language	English