13: Maintenance and Diagnostics Settings
EDS1100/2100 Device Server User Guide 121
System Settings
The EDS1100/2100 System web page allows for rebooting the device, restoring factory defaults,
uploading new firmware, configuring the short and long name, and viewing the current system
configuration.
To configure system settings:
1. Select System on the menu bar. The System page opens.
Figure 13-31 System
2. Configure the following settings:
Table 13-32 System
System Settings Description
Reboot Device Click Reboot to reboot the device. The system refreshes and redirects the
browser to the device home page.
Restore Factory Defaults Click Factory Defaults to restore the device to the original factory settings. All
configurations will be lost. The device automatically reboots upon setting back
to the defaults.
Upload New Firmware Click Choose File to locate the firmware file location. Click Upload to install the
firmware on the device. The device automatically reboots upon the installation
of new firmware.
Note: Close and reopen the web manager browser upon a firmware update.
To Next Page
Loading...
Need help?
General