About this documentation
4 Lenze · Decentralised frequency inverter 8400 motec (EtherNet/IP™ option) · EDS84DMOTEIP EN 3.0 - 02/2019
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
1 About this documentation
Contents
This documentation exclusively contains descriptions of the EtherNet/IP™ bus system for the
Inverter Drives 8400 motec.
The properties and functions of the EtherNet/IP for the Inverter Drive 8400 motec are described in
detail.
Examples illustrate typical applications.
The theoretical context is only explained as far as it is required for understanding the function of
the Communication Unit.
This documentation does not describe any software provided by other manufacturers. No liability
can be accepted for corresponding data provided in this documentation. For information on how to
use the software, please refer to the master computer (PLC, master) documents.
All brand names mentioned in this documentation are trademarks of their corresponding owners.
Tip!
Detailed information on EtherNet/IP can be found on the website of the user organisation
ODVA (Open DeviceNet Vendor Association):
www.odva.org
Note!
This documentation supplements the mounting instructions and the "Inverter Drives
8400 motec" hardware manual supplied with the Communication Unit.
The hardware manual contains safety instructions which must be observed!
To Next Page
Loading...
Need help?
General
