185
58
Changing menu settings
You can use the operator panel to change printer menu settings and customize your printer to meet
your specific needs.
Note: Changes made from a software application override the user default settings made
from the operator panel.
To select a new value as the user default setting:
1 From the Ready message, press Menu until you see the menu you need.
See the menu map for a list of the menus and their menu items.
2 Press Select.
The menu opens and the first menu item in the menu appears on the second line of the
display.
3 Press Menu until you see the menu item you need.
An asterisk (*) appears beside the current user default setting for that menu item.
Some menu items have submenus. For example, if you select Paper Menu, and then select
the Paper Type menu item, you must select another menu (such as Tray 1 Type) before the
available values display.
A value can be:
– An On or Off setting.
– A phrase or word that describes a setting.
– A numerical value that you can increase or decrease.
4 Press Select.
An asterisk (*) appears beside the value to indicate that it is now the user default setting. The
display shows the new setting for one second and then clears. The Saved message displays,
then the previous list of menu items appears on the display.
5 Press Return to go back to previous menus or menu items and set new default settings.
6 Press Go to return to the Ready message if this is the last printer setting you want to change.
Note: User default settings remain in effect until you save new settings or restore the
factory defaults.
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
Need help?
General