Lexmark W820 User Manual

222
Held Jobs
Purpose:
To print Reserve Print, Repeat Print, or Verify Print jobs stored in printer memory.
First select your user name:
Then select a value:
See also:
Printinganddeletingheldjobs
Print Buffer
Purpose:
To print any data stored in the print buffer.
Note: Print Buffer is only available when you enter the Job Menu while Waiting is
displayed. The Waiting state occurs if an incomplete job is sent to the printer or an
ASCII job, such as a print screen command, is printing.
Prime Stapler
Purpose:
If your printer does not have automatic priming, this prepares the stapler for proper functioning after a
staple cartridge is replaced or a staple jam is cleared. Priming Stapler is displayed, and the stapler
inserts several staples into a sheet of paper.
See also:
Staple Prime Src; Priming the stapler
User name Press Menu to scroll through the list of user names. Press Select to select your
user name from the list on the display.
Print All Jobs Prints all held jobs associated with your user name.
Print A Job Prints the specified held job. Press
Menu to scroll through the list of held jobs.
Press
Select to print the specific job.
Delete All Jobs Deletes all held jobs associated with your user name.
Delete A Job Deletes the designated held job. Press
Menu to scroll through the list of held
jobs. Press Select to delete the job.
Print Copies Determines the number of copies for each held job. Press
Menu to scroll
through the list of held jobs. Press
Select to specify the job you want to print.
Press
Menu to increase or decrease the number of copies, then press Select.
Downloaded From ManualsPrinter.com Manuals

Lexmark W820 Specifications

General

Brand	Lexmark
Model	W820
Category	Printer
Language	English