Miele Inspira G 2180 Technical Information

Technical Information
190
G 1xxx/G 2xxx
Rinse Aid Volume [mL]
1
Flash Pattern of "Rinse" LED
0 —
1 1x rapidly
2 2x rapidly
3 3x rapidly
2
4 4x rapidly
5 5x rapidly
6 6x rapidly
Table 080-23: Rinse Aid Quantities, G 2120/G 2140/G 2150
1
One milliliter equals 0.3 fluid ounces.
2
Standard setting.
4.2.8 Inspira and Diamante - G 2142/G 2143
Initial requirements:
1. Close the door.
2. Switch off the appliance.
Accessing:
1. Press and hold the Start/Stop button.
2. Switch on the appliance.
3. Release the Start/Stop button.
4. Immediately press the Start/Stop button 5 times; on the 5th time, hold
until the "Start/Stop" LED flashes.
5. Release the Start/Stop button.
6. If the "Start/Stop" LED does not light up, repeat the procedure.
Acknowledgement indicator:
The "Start/Stop" LED flashes rapidly (5 flashes per second).
Options:
Function Programming Display
Reset
Press the Program (or
Delay Start for G 2143)
button 1x. Press the
Start/Stop button to reset
all standard settings.
The "Rinse & Hold" LED flashes 1x
rapidly. "Rinse" LED is off: values
do not correspond to standard
settings; "Rinse" LED flashes:
values correspond to standard
settings.
Water hardness setting
Press the Program (or
Delay Start for G 2143)
button 2x. Press the
Start/Stop button as
appropriate to set the
desired water hardness.
The "Rinse & Hold" LED flashes 2x
rapidly. If the "Rinse" LED flashes
4x rapidly at intervals, this corres-
ponds to standard settings. Range:
1 - 70°d. See Table 080-25.
2

Miele Inspira G 2180 Specifications

General

Brand	Miele
Model	Inspira G 2180
Category	Dishwasher
Language	English