Miele Inspira G 2180 Technical Information

Technical Information
219
G 1xxx/G 2xxx
4.3.11 LaPerla - G 283x/G 2872
Initial requirements:
1. Close the door (open for G 2872).
2. Switch off the appliance.
Accessing:
1. Press and hold the C (clear) button.
2. Switch on the appliance.
3. Release the C (clear) button when the display lights up.
4. Immediately press the C (clear) button 3 times; on the 3rd time, hold for
at least 4 seconds.
Acknowledgement indicator:
The top line of the display shows Service program.
The display always indicates two or three parameters at a time, depending on model.
Options:
Function Programming Display
Check ID. no.
Select ID number. To
return to the main menu,
press OK.
The display shows the ID numbers
of the BAE (selection-display) and
SLT (control-power) electronics.
Fault code display
Select Fault memory. To
return to the main menu,
press OK.
The display shows the saved fault
codes. If multiple fault codes have
been registered, they are all shown.
Alternatively, the message No fault
is displayed. See Table 080-2 for a
list of fault codes.
Fault code deletion
Select Fault memory.
Select the option Delete
fault memory? with the
cursor buttons; confirm
with OK.
In the display, the option Delete
fault memory? is shown along with
the saved fault codes.
Component test
Select Component with
the cursor buttons.
Activation of the individual
components V01 - V18
takes place via the cursor
buttons. To return to the
main menu, press C
(clear).
The display lists the available
components and mini-program with
wiring diagram/short description.
The relevant test program starts
after 2 s (see Section 080-2.2).
Operating hours check
Select Operating hours
with the cursor buttons. To
return to the main menu,
press OK.
The display shows the total
operating hours.
LED test
Select Operation. Select
B01: LED test. To return
to the main menu, press
C (Clear).
All LEDs and the display light up.
Buzzer test
Select Operation. Select
B02: Buzzer test. To
return to the main menu,
press C (Clear).
Buzzer on.
Table 080-42: Service Mode Summary, G 283x/G 2872

Miele Inspira G 2180 Specifications

General

Brand	Miele
Model	Inspira G 2180
Category	Dishwasher
Language	English