Mindray BeneView T8 Service Manual

3-54
3.14 Factory Maintenance
3.14.1 Accessing Factory Maintenance Menu
To access the factory maintenance menu, select [Main Menu]→ [Maintenance >>] →
[Factory Maintenance]and then enter the required password.
The [Factory Maintenance] menu is shown below.
3.14.2 Drawing Waves
There are two methods to draw waves: Color and Mono.
 Color: selecting Color will have smoother waveforms.
 Mono: selecting Mono will have a wider viewing angle.
3.14.3 Recorder
To enable/disable the recorder, select [Recorder] and toggle between [On] and [Off].
CAUTION
z The recorder is disabled if [Recorder] is switched off in the [Factory
Maintenance>>] menu.

Mindray BeneView T8 Specifications

General

Brand	Mindray
Model	BeneView T8
Category	Monitor
Language	English