-
-
'15 • HM-T-246
Form C
Form B
Anti-freeze
water circuit
Hot water
outlet circuit
Hot water
Feed water
Hot water flow at operation to top up
*Tht-7 should be put on the bottom of the cylinder or on the pipe exit.
3-way
valve
Hot water flow at operation to top up
At the welded point of the top end plate
At the welded point of the bottom end plate
Hot water supply
Heat pump
water heater
Cylinder 1
Tht-1
Tht-2
Tht-3
Tht-4
Tht-5
Tht-6
Clean water and return
150
300
450
750
1050
1200
600
Tht-7*
9-4 Setting of remote control
<Setting temperature>
Setting water temperature should be higher than 70° C.
<Schedule setting>
Stop the recirculation pump depending on the time.
9-5 Caution for use
remote control.
www.ampair.co.uk | sales@ampair.co.uk
To Next Page
Loading...
Need help?
General
