-
202
-
'15 • HM-T-246
(e) After mounting new compressor
1) Attaching crank case heater and under-dome temperature sensor
Insert the insulation jacket from left side of compressor and
wrap it around compressor.
And then band it in front of the compressor.
N ote: Do not forget to put top insulation cover on the
compressor.
2) Wrapping the insulation jacket around the compressor
Be sure to attach them before wrapping the insulation jacket
around the compressor.
3) Attaching discharge pipe temperature sensor and gas injection temperature sensor
P ut them back the way they were.
www.ampair.co.uk | sales@ampair.co.uk
To Next Page
Loading...
Need help?
General
