Mitsubishi Heavy Industries ESA30E-25 User Manual

-
203
-
'15 • HM-T-246
White Red
Blue
Front
4) Connecting the power cable to the compressor
5) Attaching terminal cover and bundling the wires
Hook the back of terminal cover to the latch and tighten 2
screws.
The unbound wires shall be put back the way they were.
(g) Test run
1) Check whether the controls and sensors are normal.
(f) Charging refrigerant
1) Air tightness test should be done with N
2
gas by pressurizing up to 14MP a
2) E vacuate the refrigerant pipes
3) Charge CO
2
refrigerant * About 2 sets of 7m
3
bomb are required.
AMP Air Conditioning
www.ampair.co.uk | sales@ampair.co.uk

Mitsubishi Heavy Industries ESA30E-25 Specifications

General

Brand	Mitsubishi Heavy Industries
Model	ESA30E-25
Category	Heat Pump
Language	English