Operator user‟s manual
68/78
4.2.6 Import / export settings
Use this option for importing settings from another system or export settings to another one.
When exporting data to an external USB storage device, please do the following:
1- Insert the storage device. Wait for a few seconds to allow the system recognize the
device. If the device is coming with an indicator light, please wait this light to stop
flashing.
2- Press “Export settings” and follow the instructions.
When importing settings from a different easyphoto system, LOCAL ADDITIONAL
LICENSES (like PhotoID) AND STATISTICS WILL BE OVERWRITTEN AND LOST.
When working as O.T., when pressing the „Export‟ button, the settings are stored in the
Click5000 system. They can be imported later in any additional O.T.
The importation files may not be compatible among different software versions
Network parameters will be only exported when the easyphoto is working in any mode (Kiosk,
Operator, O.T.) and an USB device is used to save the data.
Network parameters will be only imported when the system is not working as O.T. and an USB
pendrive is used to import the data.
To Next Page
Loading...
Need help?
General
