Using Bluetooth 6 - 3
Bluetooth Configuration
By default, the MC75A is configured to using the Microsoft Bluetooth stack. Refer to the MC75A Mobile Computer
Integrator Guide, Appendix B, for information on switching to the StoneStreet One Bluetooth stack.
Table 6-1 list the services supported by the Microsoft Bluetooth stack and the StoneStreet One Bluetooth stack.
Table 6-2 list the COM ports available for the Microsoft Bluetooth stack and the StoneStreet One Bluetooth stack.
Bluetooth Power States
Cold Boot
With StoneStreet One Bluetooth Stack
Performing a cold boot on the MC75A turns off Bluetooth after initialization (which takes a few moments). It is
normal to see the Bluetooth icon appear and disappear (when using the Classic Home screen), as well as a wait
cursor, when initialization proceeds in all modes.
Table 6-1
Bluetooth Services
Microsoft Bluetooth Stack StoneStreet One Bluetooth Stack
OBEX Object Push Services OBEX Object Push Services
Hands-Free Audio Gateway Services Hands-Free Audio Gateway Services
Serial Port Services Serial Port Services
Personal Area Networking Services Personal Area Networking Services
PBAP Services IrMC Services
Dial-Up Networking Services Dial-Up Networking Services
HID Client Services HID Client Services
A2DP/AVRCP Services A2DP/AVRCP Services
File Transfer Services
Headset Audio Gateway Services
Table 6-2
COM Ports
Microsoft Bluetooth Stack StoneStreet One Bluetooth Stack
COM5 COM5
COM9 COM9
COM11
COM21
COM22
COM23
To Next Page
Loading...
Need help?
General