204
Location Data
The built-in location data unit records the camera’s current latitude,
longitude, and altitude, together with the current time (Coordinated
Universal Time, or UTC). Location data embedded in pictures can be
viewed in the location data page of the playback photo info display
(
0
238).
Location Data Options
To enable or disable the location data function or adjust location data
settings, highlight [Location data (built-in)] in the setup menu and
press
2
.
Location Data
Option Description
[Record
location data]
Select [ON] to enable the location data function.
[Standby timer]
If [ON] is selected when [Record location data] is set to
[ON], the standby timer will expire if no operations are
performed for the period chosen using Custom Setting
c3 [Power off delay]> [Standby timer]. Choose this
option to reduce the drain on the battery.
[Set clock from
satellite]
Select [ON] to synchronize the camera clock with the
time reported by the location data function.
[Create log]
Record a track log.
•
[Log location data]: The camera will log location data
at the interval chosen using [Log interval] for the time
selected for [Log length]. To end, pause, or resume the
log, highlight [Log location data] and press
2
.
•
[Log interval]: Choose how often the camera logs its
current location.
•
[Log length]: Choose how long logging will continue.
To Next Page
Loading...
Need help?
General
