716
B
The Setup Menu: Camera Setup
Creating and Saving Fine-Tuning Values
1
Attach the lens to the camera.
2
Select [AF fine-tuning options] in the setup menu, then highlight
[Fine-tune and save lens] and press
2
.
An AF fine-tuning dialog will be displayed.
3
Press
4
or
2
to fine-tune autofocus.
•
Choose from values between +20 and −20.
•
The current value is shown by
g
, the previously-selected value by
j
.
•
If a zoom lens is attached, you can choose separate fine-tuning
values for maximum angle (WIDE) and maximum zoom (TELE). Use
1
and
3
to choose between the two.
•
The larger the fine-tuning value, the farther the focal point is from
the lens; the smaller the value, the closer the focal point.
4
Press
J
to save the new value.
To Next Page
Loading...
Need help?
General
