223
Recording HLG Video
Video recorded in Hybrid Log Gamma (HLG) format can be used for HDR
broadcasting and the like. To record HLG video, select [H.265 10-bit
(MOV)] for [Video file type] in the video recording menu and choose
the [HLG] tone mode.
•
o
will appear in the shooting display.
•
For optimal color reproduction when viewing HLG footage, use
computers, operating systems, applications, monitors, and other
equipment compatible with HDR.
D
Cautions: HLG Video
•
The lowest value available for the [ISO sensitivity settings] > [Maximum
sensitivity] item in the video recording menu is ISO 800.
•
The lowest value available for the [ISO sensitivity settings]> [ISO
sensitivity (mode M)] item in the video recording menu is ISO 400.
•
ISO sensitivities of Hi 0.3 through Hi 2.0 are not available.
•
Picture Control settings cannot be adjusted using the [Set Picture
Control] item in the video recording menu. You can control the
appearance of HLG videos using [HLG quality] in the video recording
menu.
•
The [Active D-Lighting] item in the video recording menu is set to [Off]
and cannot be changed.
•
The display in the monitor may flicker or appear grainy.
•
The camera may have trouble focusing using autofocus but this does not
indicate a malfunction.
D
HDR (HLG) Output
Optimal color reproduction in HDR (HLG) footage output via HDMI can only
be achieved if your storage device, monitor, and other equipment support
HDR (HLG). If a signal is received from the connected device indicating that it
supports HDR (HLG), the camera will respond with a “gamma: HLG” identifier.
Recording HLG Video
To Next Page
Loading...
Need help?
General
