738
B
The Setup Menu: Camera Setup
Adjust status LED and link mode settings for optional WR-R11a and
WR-R10 wireless remote controllers. You can also choose a link mode for
connection to optional radio-controlled flash units that support
Advanced Wireless Lighting.
D
WR-R10 Wireless Remote Controllers
•
A WR-A10 adapter is required when using the WR-R10.
•
Be sure the firmware for the WR-R10 has been updated to the latest version
(version 3.0 or later). For information on firmware updates, see the Nikon
website for your area.
LED Lamp
Enable or disable the status LEDs on the WR-R11a or WR-R10 wireless
remote controller mounted on the camera. For more information, see
the documentation supplied with the wireless remote controller.
Wireless Remote (WR) Options
G
button
U
B
setup menu
To Next Page
Loading...
Need help?
General
