ＮＩＳＳＥＩ ＣＯＲＰＯＲＡＴＩＯＮ E6581815
F-32
6
6.11.6 Reverse-run prohibition
: Reverse-run prohibition
Function
This function prevents the motor from running in the forward or reverse direction when it receives the
wrong operation signal.
[Parameter setting]
Title Function Adjustment range Default setting
Reverse-run prohibition
0: Forward/reverse run permitted
1: Reverse run prohibited
2: Forward run prohibited
0
6.12 Brake sequence function
6.12.1 Enabling the brake sequence function
: Braking mode selection
: Braking release time
: Creeping time
: Creeping frequency
: Braking delay time
Function
・Configures motor operation settings during mechanical brake opening/closing.
・A mechanical brake operation timing signal is output from the inverter for raising/lowering
applications, etc.
[Parameter Settings]
Title Function Adjustment range Default setting
Braking mode selection
0: Disabled
1: -
2: -
3: Disabled
0
Braking release time 0.00-10.00s 0.5s
Creeping time 0.00-10.00s 0.00s
Creeping frequency F240 -20Hz 3Hz
Braking delay time 0.00-10.00s 0.3s
To Next Page
Loading...
General