Oce fx3000 User Manual

System setup
21
3
Ecology features 3
Save toner 3
You can save toner using this feature. When
you set save toner to On, print appears
lighter. The default setting is Off.
a Press Menu, 2, 6, 1.
26.Ecology
1.Save Toner
a
On
b Off
Select ab & OK
b Press a or b to choose On (or Off).
Press OK.
c Press Stop.
Note
We do not recommend Save Toner for
printing Photo or Gray Scale images.
Sleep timer 3
Setting the sleep time reduces power
consumption by turning off the fuser while the
machine is idle.
You can choose how long the machine must
be idle (from 00 to 99 minutes) before it goes
into sleep mode. When the machine receives
a fax, computer data, or makes a copy, the
timer will be reset. The default setting is 05
minutes.
When printing or copying in sleep mode,
there will be a short delay while the fuser
warms up.
a Press Menu 2, 6, 2.
26.Ecology
2.Sleep Timer
Sleep Time:05Min
Enter & OK Key
b Enter the length of time the machine is
idle before entering sleep mode (00 to
99). Press OK.
c Press Stop.
To turn off sleep mode, press Secure and
Job Cancel at the same time in b. Press a
or b to choose Off (or On). Press OK.
Note
When you turn off sleep mode, the setting
will take effect the next time the machine
copies, prints or is turned off and on.

Oce fx3000 Specifications

General

Brand	Oce
Model	fx3000
Category	All in One Printer
Language	English