Oce fx3000 User Manual

Chapter 6
42
Answer Mode settings 6
Ring Count 6
The ring count sets the number of times the
machine rings before it answers in Fax Only
and Fax/Tel modes.
If you have extension phones on the same
line as the machine or subscribe to the
telephone company’s Unique Ring service,
keep the Ring Count setting of 4. (See
Operation from extension telephones on
page 53 and Ext. Tel. RX on page 43.)
a Make sure you are in Fax mode .
b Press Menu, 3, 1, 1.
31.RX Settings
1.Ring Count
a 03
b 04
Select
ab & OK
c Press a or b to choose 00, 01, 02, 03
or 04. Press OK.
d Press Stop.
Note
Select 00 in c to have the machine
answer immediately.
F/T Ring Time 6
When somebody calls your machine, you and
your caller will hear the normal telephone ring
sound. The number of rings is set by the ring
count setting.
If the call is a fax, then your machine will
receive it; however, if it is a voice call the
machine will sound the F/T ring (a fast
double-ring) for the time you have set in the
F/T ring time setting. If you hear the F/T ring
it means that you have a voice caller on the
line.
Because the F/T ring is made by the machine,
extension and external telephones will not
ring; however, you can still answer the call on
any telephone. For more information see
Using remote codes on page 54.
a Make sure you are in Fax mode .
b Press Menu, 3, 1, 2.
31.RX Settings
2.F/T Ring Time
a 20 Secs
b 30 Secs
Select
ab & OK
c Press a or b to choose how long the
machine will ring to alert you that you
have a voice call (20, 30, 40 or 70
seconds). Press OK.
d Press Stop.

Oce fx3000 Specifications

General

Brand	Oce
Model	fx3000
Category	All in One Printer
Language	English