Receiving a fax
43
6
Ext. Tel. RX 6
Turning Ext. Tel. RX On allows the machine to
receive fax calls automatically if you lift any
handset on the same line as the machine.
When you see Receiving on the LCD or
when you hear ‘chirps’ through the handset of
an extension phone connected to another
telephone wall jack, just replace the handset
and your machine will receive the fax.
If this feature is set to on, but your machine
does not connect a fax call when you lift the
handset of an extension or external phone,
press the Fax Receive Code l51.
Note
If you use a modem, or send faxes from a
computer, on the same line and your
machine intercepts them, set Ext. Tel. RX
to Off.
a Make sure you are in Fax mode .
b Press Menu, 3, 1, 3.
31.RX Settings
3.Ext. Tel. RX
a On
b Off
Select
ab & OK
c Press a or b to choose On,or Off.
Press OK.
d Press Stop.
Setting the Print Density 6
You can adjust print density to make your
printed pages darker or lighter.
a Make sure you are in Fax mode .
b Press Menu, 3, 1, 6.
31.RX Settings
6.Print Density
-nnonn+
Select
dc & OK
c Press c to make the print darker.
Or press d to make the print lighter.
Press OK.
d Press Stop.
To Next Page
Loading...
Need help?
General
