Oce fx3000 User Manual

Chapter 9
66
Note
If your machine is set to Manual mode
and you want to use the remote retrieval
features, you can access your machine by
waiting about 2 minutes after it starts
ringing, and then entering the R R
Passcode within 30 seconds.
Retrieving fax messages
a Dial your fax number from a telephone
or another fax machine using touch
tone.
b When your machine answers,
immediately enter your R R Passcode (3
digits followed by l). If you hear one
long beep, you have messages.
c When you hear two short beeps, use the
dial pad to press 9 6 2.
d Wait for a long beep, and then use the
dial pad to enter the number of the
remote fax machine where you want
your fax messages sent to, followed by
## (up to 20 digits).
e Hang up after you hear your machine
beep. Your machine will call the other
machine, which will then print your fax
messages.
Note
You can insert a pause in a fax number by
using the # key.
Changing the Fax Forwarding
number
You can change the default setting of your fax
forwarding number from another telephone or
fax machine using touch tone.
a Dial your fax number from a telephone
or another fax machine using touch
tone.
b When your machine answers, enter
your R R Passcode (3 digits followed by
l). If you hear one long beep, you have
messages.
c When you hear two short beeps, use the
dial pad to press 9 5 4.
d Wait for a long beep, and then use the
dial pad to enter the new number of the
remote fax machine where you want
your fax messages forwarded followed
by ## (up to 20 digits).
e Press 9 0 to reset the machine when you
have finished.
f Hang up after you hear your machine
beep.
Note
You can insert a pause in a fax number by
using the # key.

Oce fx3000 Specifications

General

Brand	Oce
Model	fx3000
Category	All in One Printer
Language	English