Oce fx3000 User Manual

Sending a fax
35
5
Contrast 5
For most documents the default setting of
Auto will give the best results. It
automatically chooses the suitable contrast
for your document.
If your document is very light or dark,
changing the contrast may improve the
quality of the fax.
Use Dark to increase the contrast of a light
document.
Use Light to decrease the contrast of a dark
document.
a Make sure you are in Fax mode .
b Load your document.
c Press Menu, 3, 2, 1.
32.TX Settings
1.Contrast
a Auto
b Light
Select
ab & OK
d Press a or b to choose Auto, Light
or Dark. Press OK.
Note
Even if you choose Light or Dark, the
machine will send the fax using the Auto
setting if you choose Photo as the fax
Resolution.
Changing fax resolution 5
The quality of a fax can be improved by
changing the fax resolution. Resolution can
be changed for the next fax or for all faxes.
To change the fax resolution for the
next fax
5
a Make sure you are in Fax mode .
b Load your document.
c Press Resolution, then a or b to
choose the resolution. Press OK.
To change the default fax resolution 5
a Make sure you are in Fax mode .
b Press Menu, 3, 2, 2.
32.TX Settings
2.Resolution
a Standard
b Fine
Select ab & OK
c Press a or b to choose the resolution
you want. Press OK.
Below is a list of the available fax
resolution settings. The finer the
resolution, the longer the fax will take to
transmit.
 Standard
Suitable for most typed documents.
 Fine
Good for small print.
 EX-Fine
Good for small print or artwork.
 Photo
Use when the document has varying
shades of gray or is a photograph.

Oce fx3000 Specifications

General

Brand	Oce
Model	fx3000
Category	All in One Printer
Language	English