Oce fx3000 User Manual

Chapter 7
48
Before you choose the ring pattern to
register
7
You can only register one Unique Ring
pattern with the machine. Some ring patterns
cannot be registered. The ring patterns below
are supported by your Océ machine. Register
the one your telephone company gives you.
Note
If the ring pattern you received is not on
this chart, please call your telephone
company and ask for one that is
shown.
 The machine will only answer calls to its
registered number.
 The first two rings are silent on the
machine. This is because the fax must
<<listen>> to the ring pattern (to compare
it to the pattern that was ‘registered’).
(Other telephones on the same line will
ring.)
 If you program the machine properly, it will
recognize the registered ring pattern of the
‘fax number’ within 2 ring patterns and
then answer with a fax tone. When the
‘voice number’ is called, the machine will
not answer.
Registering the Unique Ring pattern
Very important!
7
After you have set the Unique Ring feature to
ON, the answer mode is set to Manual
automatically. Unless you have a TAM or
Voice Mail set up on the Unique Ring number,
Manual mode means you must answer all
the calls yourself. You can not change the
answer mode to another mode while the
Unique Ring is set to on.
a Press Menu, 3, 0, 2.
30.Miscellaneous
2.Unique Ring
a Off
b Set
Select ab & OK
b Press a or b to choose Set.
c Press OK.
d Press a or b to choose the stored ring
pattern you want to use. Press OK.
e (You will hear each pattern as you scroll
through the four patterns. Make sure
you choose the pattern that the
telephone company gave you.)
f Press Stop. Unique Ring is now set to
on.
Turning off Unique Ring 7
a Press Menu, 3, 0, 2.
30.Miscellaneous
2.Unique Ring
a Off
b Set
Select ab & OK
b Press a or b to choose Off. Press OK.
c Press Stop.
Ring
Pattern
Rings
1 long-long
2 short-long-short
3 short-short-long
4 very long
(normal pattern)

Oce fx3000 Specifications

General

Brand	Oce
Model	fx3000
Category	All in One Printer
Language	English