Oce fx3000 User Manual

Receiving a fax
45
6
Setting the Receive TTI 6
You can set the machine to print the received
date and time in the top center of each
received fax page.
a Make sure you are in Fax mode .
b Press Menu, 3, 1, 8.
31.RX Settings
8.Receive TTI
a On
b Off
Select
ab & OK
c Press a or b to choose On (or Off).
Press OK.
d Press Stop.
Note
• The received time and date will not appear
when using Internet Fax.
• Make sure you have set the current date
and time in the machine.
Setting the Substitute RX 6
When the paper tray is empty, toner is used
up or any other error occurs so that the
machine cannot print, if you choose On,
incoming faxes will be stored into memory. If
you choose Off, incoming fax calls will not be
automatically answered until the problem
resolves.
a Make sure you are in Fax mode .
b Press Menu, 3, 1, 0.
31.RX Settings
0.Substitute RX
a On
b Off
Select
ab & OK
c Press a or b to choose On (or Off).
Press OK.
d Press Stop.
Receiving a fax at the end of a
conversation 6
At the end of a conversation you can ask the
other party to send you a fax before you both
hang up.
a Ask the other person to place the
document in their machine and to press
Start or Send key.
b When you hear the CNG tones (slowly
repeating beeps), press Start.
c Replace the external handset.

Oce fx3000 Specifications

General

Brand	Oce
Model	fx3000
Category	All in One Printer
Language	English