3-18
3-6 Parameter Transition
3
Operation
3-6 Parameter Transition
*1. Data is not stored by pressing the Mode key.
*2. Press the Enter key to store the data.
*3. When you press the Mode key after you return to the parameter number display without storing data in the
extended function mode, the mode selection function is selected.
*4. When you press the Enter key with d*** or F001 displayed, the monitor value is stored as the initial display
that appears when the power is turned on.
*5. When you press the Enter key, the first digit of each parameter setting is stored as the initial display that
appears when the power is turned on.
(Example: , etc.)
*4
*3
*1
*1
*2
*2
dk0k0k1 0.0
dk0k8k3
ak-k-k-
bk-k-k-
ck-k-k-
hk-k-k-
ak0k0k1
0k0k0k0
fk0k0k1
ak0k0k1
ak0k0k2
fk0k0k4
*4
Press the key
*4
*4
*5
*5
*5
*5
0k0k0k1 9k9k9k9
0k0k0k0
0k0k0k1 9k9k9k9
ak0k0k3
fk0k0k2 ak-k-k-
,
To Next Page
Loading...
Need help?
General