Omron 3G3JX User Manual

4-7
4-2 Function Mode
4
Functions
<Group A: Standard Function Parameter>
Frequency Reference Selection
Select the method of the frequency reference.
* To switch to the 2nd frequency reference, allocate 08 (SET) to the multi-function input terminal and then turn it
on.
RUN Command Selection
Select the method of the RUN/STOP command.
* To switch to the 2nd RUN command, allocate 08 (SET) to the multi-function input terminal and then turn it on.
Parameter No. Function name Data Default setting Unit
A001
Frequency reference
selection
00: Digital Operator (FREQ adjuster)
01: Terminal
02: Digital Operator (F001)
03: ModBus communication
10: Frequency operation result
00 ⎯
*
A201
2nd frequency
reference selection
Related functions A005, A141 to A143, A145, A146
Data Frequency reference source
00 FREQ adjuster
01 Voltage or current directive from the terminal.
02 F001 value set via the Digital Operator.
03 ModBus communication
10 Result of the frequency operation function
Parameter No. Function name Data Default setting Unit
A002
RUN command
selection
01: Terminal
02: Digital Operator
03: ModBus communication
02 ⎯
*
A202
2nd RUN command
selection
Related functions F004, A005, C001 to C005
Data RUN command source
01
Turn ON/OFF the FW and RV allocated to the terminal.
The STOP command is activated if both Forward/Reverse commands are input
simultaneously.
02 Use the STOP/RESET key on the Digital Operator.
03 Use the ModBus communication.

Omron 3G3JX Specifications

General

Brand	Omron
Model	3G3JX
Category	Inverter
Language	English