Chapter 2: Safety
problems for braking as well as navigation. Refer to 13849-2 for instruc-
tions on how to test the robot in non-standard environments.
l
Temperature — 5 to 40°C (41 to 104°F), with a recommended humidity range of 5% to
95%, non-condensing.
Non-Intended Use
The LD Platform Cart Transporter is not intended for use in any of the following situations:
l
In hazardous (explosive) atmospheres
l
Uncontrolled areas, for example, areas open to general public access
Application in such areas may require deployment of additional safety measures, and
risk analysis
LD Platform Cart Transporters are designed for operating in industrial or professional
environments. They must be deployed in a manner that takes into account potential
risks to personnel and equipment.
l
In the presence of ionizing or non-ionizing radiation
l
In life-support systems
l
In residential installations
l
Where the equipment will be subject to extremes of heat or humidity
l
In mobile, portable, marine, or aircraft systems
NOTE: The gyroscope used to assist in navigation in LD Platform Cart
Transporters requires a stationary environment for optimum accuracy.
Therefore, we do not recommend them for use on a ship, train, aircraft, or
other moving environment.
IMPORTANT: The instructions for operation, installation, and main-
tenance given in this guide and the AMR user’s guide must be strictly
observed.
Non-intended use of LD platforms can:
l
Cause injury to personnel
l
Damage the platform or other equipment
l
Reduce system reliability and performance
The body of the AMR must not come into contact with liquids. The drive wheels can tolerate
damp floors, but the body of the AMR must remain dry.
If there is any doubt concerning the application, ask your local Omron support to determine if
it is an intended use or not.
14766-000 Rev H LD Cart Transporter User's Manual 33
To Next Page
Loading...
Need help?
General
