5. 4K Photo and Drive Settings
104
∫ Scenes not suitable
Recording in extremely bright locations or indoors
When subjects are recorded in an extremely bright place or under fluorescent/LED
lighting, the colour tone or brightness of the image may change, or horizontal stripes may
appear on the screen.
Lowering the shutter speed may reduce the effect of the horizontal stripes.
Subjects that are moving fast
If you record a subject moving fast, the subject in the recorded pictures may appear
distorted.
∫ The camera’s setup for the 4K Photo function
The camera’s setup is automatically optimised for 4K photo recording.
• The following [Rec] menu items are fixed to the settings below:
¢ Changes according to the aspect ratio.
• 4K burst files are recorded with the settings indicated below:
Settings in the [Motion Picture] menu are not applied to 4K burst files.
• When recording with the 4K Photo function, the ranges for the following functions differ from
the ones available for taking pictures:
– Shutter speed: 1/30 to 1/16000
– [Min. Shtr Speed]: [1/1000] to [1/30]
– Exposure Compensation: j3EV to
i3EV
– ISO sensitivity: [AUTO], [200] to [6400] ([L.100] to [6400] when [Extended ISO] is set)
[Picture Size]
¢
[4K] (8M) [Quality] [A]
[4:3]: 3328k2496
[1:1]: 2880k2880
[16:9]: 3840k2160
[3:2]: 3504k2336
[Shutter Type] [ESHTR]
[Rec Format] [MP4] [Continuous AF] [ON]
[Rec Quality] [4K/100M/30p]
• When recording with the 4K Photo function, the following functions are disabled:
–Flash
– Bracket Recording
– Programme Shift
– [AF Mode] ( )
– [MF Assist] ([4K Pre-Burst] only)
– White Balance ( )
To Next Page
Loading...
Need help?
General
