111
5. 4K Photo and Drive Settings
Controlling Focus After Recording (Post Focus/
Focus Stacking)
Applicable modes:
The camera allows you to take 4K burst pictures while shifting the focus to different areas.
After taking these pictures, you can select the desired focus area.
This function is suited for recording still objects.
• Use a UHS Speed Class 3 card.
• We recommend that you use a tripod when recording images to be used for Focus Stacking.
1
Press [ ] (4).
2
Press 2/1 to select the Post Focus icon
([ ]), and press [MENU/SET].
• By default, you can also perform the same operations
as steps
1 and 2 by pressing [Fn4] and then selecting
[ON].
3
Decide on the composition, and press the
shutter button halfway.
• Auto Focus will detect focus areas on the screen.
(Excluding the edges of the screen)
• If no areas on the screen can be brought into focus, the
focus display (
A
) will flash. Recording is not possible in this case.
4K burst recording while
automatically shifting the
focus.
Touch the desired focus
point.
A picture with the desired
focus point is made.
From the time you press the shutter button halfway
until the end of recording:
• Maintain the same distance to the subject and the
same composition.
To Next Page
Loading...
Need help?
General
