5. 4K Photo and Drive Settings
116
Taking Pictures with the Self-timer
Applicable modes:
1
Press [ ] (4).
2
Press 2/1 to select the self-timer icon
([ ], etc.), and then press 3.
3
Press 2/1 to select the operation setting,
and then press [MENU/SET].
• Time setting for the self timer can also be set by [Self Timer] in the [Rec] menu.
4
Press the shutter button halfway to focus
and then press it fully to take the picture.
• Focus and exposure will be set when the shutter button
is pressed halfway.
• After the self-timer indicator flashes, recording starts.
Picture is taken 10 seconds after shutter is pressed.
After 10 seconds the camera takes 3 pictures at about 2 seconds intervals.
Picture is taken 2 seconds after shutter is pressed.
• When using a tripod, etc., this setting is a convenient way to avoid the jitter
caused by pressing the shutter button.
10
To Next Page
Loading...
Need help?
General
