93
4. Focus, Brightness (Exposure) and Colour tone Settings
Setting the Light Sensitivity
Applicable modes:
This allows the sensitivity to light (ISO sensitivity) to be set.
1
Press [ ] (3).
2
Select the ISO sensitivity by rotating the
control dial.
A ISO sensitivity
¢1 When [ISO Auto Upper Limit (Photo)] in the [Rec] menu is set to [AUTO].
¢2 When [Extended ISO] in the [Custom] ([Exposure]) menu is set to [ON].
3
Press [MENU/SET] to set.
• You can also press the shutter button halfway to set.
AUTO
The ISO sensitivity is automatically adjusted according to the
brightness.
• Up to [ISO3200]
¢1
(Intelligent ISO)
The camera automatically sets the optimum ISO sensitivity
and shutter speed to suit the movement of the subject and
brightness of the scene to minimise the jitter of the subject.
• Up to [ISO3200]
¢1
• The shutter speed is not fixed when the shutter button is
pressed halfway. It is continuously changing to match the
movement of the subject until the shutter button is pressed
fully.
L.100
¢2
, from 200 to 25600 The ISO sensitivity is fixed to various settings.
2
00
2
00
4040
ISO
ISOISOISOISOISOISOISOISOISOISOISO
AUTOAUTO
To Next Page
Loading...
Need help?
General
