2. Getting Started/Basic Operations
26
Inserting and removing the card (optional)
• Check that the camera on/off switch is set to [OFF].
1
Slide the release lever A to the [OPEN]
position and open the card/battery door.
2
Insert the card B all the way in until you
hear a clicking sound.
• Check the orientation of the card.
• Do not touch the card terminals C.
3
Close the card/battery door and slide the
release lever to the [LOCK] position.
∫ To re mov e
Insert until a clicking sound is heard and then pull it
straight out.
• Turn the camera off and wait for the “LUMIX” display on the monitor to clear before removing
the card. (Otherwise, this unit may no longer operate normally and the card itself may be
damaged or the recorded pictures may be lost.)
To Next Page
Loading...
Need help?
General
