13. Others
290
Message Display
The following explains the meaning of major messages displayed on the screen, and how
to respond to them.
∫ Memory cards
∫ Battery
[Memory Card Error]/[Format this card?]
• Insert a different card.
• Perform formatting (P28) on this unit after saving necessary data on a PC, etc.
[Read Error]/[Write Error]/[Please check the card]
• It has failed to read or write data.
Remove the card after turning this unit off. Insert the card again, turn this unit on, and try to
read or write the data again.
• Check whether card has been inserted correctly. (P26)
• Insert a different card.
[Recording was cancelled due to the limitation of the writing speed of the card]
• Motion picture recording and recording with the 4K Photo and Post Focus functions require
the use of cards with Speed Class ratings that support the corresponding types of recording.
Use supported cards. (P27)
• If recording stops even when you are using a card that meets the Speed Class rating, the data
writing speed is too slow. We recommend making a backup and then formatting the card
(P28).
Depending on the type of the card, recording may stop in the middle.
[Memory Card Error]/[This memory card cannot be used]
• Use a card compatible with this unit. (P27)
[This battery cannot be used]
• Use a genuine Panasonic battery. If this message is displayed even when a genuine
Panasonic battery is used, contact the dealer or Panasonic.
• Remove any dirt and dust on the battery terminal.
To Next Page
Loading...
Need help?
General
