Polaris RANGER 1000 2021 User Manual

2.48
9850045 R01 - 2020-2021 RANGER 1000 Service Manual
© Copyright Polaris Inc.
Inspect shift cable, clevis pins, and pivot bushings and
replace if worn or damaged.
1. Shift to High Gear, release the shifter. Measure the
distance between shifter and top side of the dash
opening.
2. Shift to Park, release the shifter. Measure the
distance between shifter and bottom side of the dash
opening.
NOTICE
For optimal shift cable adjustment, the gap
measurements in High and Park should be equal. This
will ensure the shifter will not contact the dash.
3. Locate the shift cable
q
through the right rear wheel
well area.
4. Inspect shift cable
q
, dust boot
w
, clevis pin and
pivot bushings
e
, and mount
r
. Verify there is no
wear or damage. Replace if wear or damage is found.
5. Loosen the lower jam nut
t
and pull the cable out of
the mount bracket to move the upper jam nut
y
.
MAINTENANCE

Polaris RANGER 1000 2021 Specifications

General

Brand	Polaris
Model	RANGER 1000 2021
Category	Offroad Vehicle
Language	English