Polaris RANGER 1000 2021 User Manual

3
9850045 R01 - 2020-2021 RANGER 1000 Service Manual
© Copyright Polaris Inc.
3.51
OIL SUMP SERVICE
REMOVAL
1. Remove the skid plate. Refer to Skid Plate Service
page 11.35.
2. Drain the engine oil.
3. Remove the M8 fasteners
q
securing the oil sump to
the engine.
4. Remove the thirteen M6 fasteners
w
securing the oil
sump to the engine.
5. Remove the oil sump from the engine.
INSTALLATION
1. Clean the gasket surface on the engine.
2. Clean the gasket surface on the oil sump and apply a
thin film of crankcase sealant (PN 2881416).
3. Install the thirteen M6 oil sump fasteners
w
and
torque to specification.
TORQUE
Oil Sump Fasteners (M6):
9 ft-lbs (12 Nm)
ENGINE / COOLING / EXHAUST

Polaris RANGER 1000 2021 Specifications

General

Brand	Polaris
Model	RANGER 1000 2021
Category	Offroad Vehicle
Language	English