3.12
9850045 R01 - 2020-2021 RANGER 1000 Service Manual
© Copyright Polaris Inc.
3. Install the push rivet
w
to secure the airbox to the
chassis.
4. Install the intake ducts and tighten clamps
q
to
specification.
TORQUE
Airbox Fasteners:
35 in-lbs (4 Nm)
5. Install the ignition coil. Refer to Ignition Coil Service
page 4.18.
INTAKE DUCT SERVICE
AIRBOX TO THROTTLE BODY
1. Disconnect the purge line from the intake manifold
retainers
q
.
2. Loosen the intake duct clamps
w
and carefully pull
the intake duct off the airbox and throttle body.
IMPORTANT
Ensure all sealing surfaces are clean and free from
debris before assembly.
TORQUE
Intake Duct Clamps:
35 in-lbs (4 Nm)
AIRBOX TO SIDE BEZEL REMOVAL
1. Remove the side bezel cover. Refer to Side Bezel
Cover Service page 11.38.
2. Loosen the clamp at the airbox and remove the duct
from the airbox.
ENGINE / COOLING / EXHAUST
To Next Page
Loading...
Need help?
General
