Polaris RANGER 1000 2021 User Manual

8.58
9850045 R01 - 2020-2021 RANGER 1000 Service Manual
© Copyright Polaris Inc.
20.Pull out on the drive shaft to center the joint in the
housing. Slide a straight O-ring pick or a small slotted
screw driver between the large end of the boot and
the joint housing and lift up to equalize the air
pressure in the boot.
21.Position the boot lip in its groove. Install and tighten
the large clamp
r
using the appropriate clamp tool.
Axle Boot Clamp Tool: PU-48951
or
CV Boot Clamp Pliers: 8700226
FINAL DRIVE

Polaris RANGER 1000 2021 Specifications

General

Brand	Polaris
Model	RANGER 1000 2021
Category	Offroad Vehicle
Language	English