Qlogic QConvergeConsole CLI 2400 Series User Manual

5–Fibre Channel Noninteractive Commands
-r (Update HBA Parameters)
5-32 SN0054667-00 C
To set the link speed of selected target(s) attached to one adapter to the
designated speed, issue the following command:
# qaucli -pr fc -q (<hba instance> | <hba wwpn> | <all>) <target
wwpn> <speed>
Where:
-r
(Update HBA Parameters)
To update the adapter parameters, issue the following command:
# qaucli -pr fc -r (<hba instance> | <hba wwpn> | all) <File Name>
Where:
To save the adapter parameters to a file, issue the following command:
# qaucli -pr fc -r (<hba instance> | <hba wwpn>) save <File Name>
Where:
hba instance = Adapter number (use -g command to find)
hba wwpn = World wide port name of the adapter
all = Reports link speed for all targets on all adapters in the system
target wwpn = World wide port name of the target
speed = Link speed
hba instance = Adapter number (use -g command to find)
hba wwpn = World wide port name of the adapter
all = All adapter ports in the system are updated with the new
adapter parameters
hba parameters file
name
= File name or a path to a file that contains the updated adapter
parameters
hba instance = Adapter number (use -g command to find)
hba wwpn = World wide port name of the adapter
hba parameters file
name
= File name or a path to a file to save the adapter parameters

Qlogic QConvergeConsole CLI 2400 Series Specifications

General

Brand	Qlogic
Model	QConvergeConsole CLI 2400 Series
Category	Software
Language	English