Qlogic QConvergeConsole CLI 2400 Series User Manual

4–NIC Noninteractive Commands
-vlandel (Remove VLAN from Port or Team)
4-22 SN0054667-00 C
For example:
> qaucli -pr nic -vlanadd_preview
VLAN List:
ListIndex: 1 CNA: 1 CNA Port: 1 VLAN ID: None MAC:
00:c0:dd:0a:b1:a8 Description: QLogic 10Gb PCI Ethernet Adapter -
Network Load Balancing Filter Device
ListIndex: 2 CNA: 1 CNA Port: 2 VLAN ID: None MAC:
00:c0:dd:0a:b1:a9 Description: QLogic 10Gb PCI Ethernet Adapter #2
- Network Load Balancing Filter Device
-vlandel
(Remove VLAN from Port or Team)
To remove all VLANS from a port or team, issue the -vlandel command as
follows:
> qaucli -pr nic -vlandel <port_insts|ALL> <vlan_id|ALL>
Where port_insts specifies the port’s indices comma separated (for example,
1,2) and vlan_id specifies a numeric value 1–4095.
For example:
> qaucli -pr nic -vlandel ALL ALL
VLAN List:
ListIndex: 1 CNA: 1 CNA Port: 2 VLAN ID: 120 MAC:
00:c0:dd:0a:b1:a9 Description: QLogic 10Gb PCI Ethernet Adapter #2
User entered ListIndices: ALL
User entered VLAN ID: ALL
About to remove VLAN ID(s) for ListIndex: 1. (QLogic 10Gb PCI
Ethernet Adapter #2) Please wait ...
Successfully removed VLAN ID.
-vlandel_preview
To preview the virtual LAN, port, and team information before you delete a VLAN
from a port or team, issue the -vlandel_preview command as follows:
> qaucli -pr nic -vlandel_preview

Qlogic QConvergeConsole CLI 2400 Series Specifications

General

Brand	Qlogic
Model	QConvergeConsole CLI 2400 Series
Category	Software
Language	English