9–Fibre Channel Interactive Commands
Adapter Configuration
SN0054667-00 C 9-7
Adapter Configuration
2. Adapter Configuration2. Fibre Channel Adapter
From the main menu, select the Adapter Configuration option, and then select
the adapter type (Fibre Channel Adapter). The Fibre Channel Adapter
Configuration menu presents options to configure adapter parameters, configure
persistent names, configure boot devices, configure target link speed, export a
configuration, and generate reports. For example:
Adapter Type Selection
1: Converged Network Adapter
2: Fibre Channel Adapter
(p or 0: Previous Menu; m or 98: Main Menu; ex or 99: Quit)
Please Enter Selection: 2
Fibre Channel Adapter Configuration
1: HBA Parameters
2: Persistent Names (udev)
3: Boot Devices Configuration
4: Target Link Speed (iiDMA)
5: Export (Save) Configuration
6: Generate Reports
To Next Page
Loading...
Need help?
General
