10–Converged Network Adapter Interactive Commands
CNA FCoE Configuration
10-40 SN0054667-00 C
Driver Parameters
2. Adapter Configuration1. CNA Configuration1. CNA FCoE Configuration5. Driver Parameters
From the Converged Network Adapter (CNA) FCoE Configuration menu, select
the Driver Parameters option. From the port menu, select a port to open the
Driver Settings Menu with options to configure target display options and target
binding options. For example:
Converged Network Adapter (CNA) FCoE Configuration
CNA Model QLE8242 SN: AFE1028C03899
1. Port 2 [Protocol(s): NIC iSCSI FCoE]
MAC Address: 00:0E:1E:04:95:EC
WWPN: 21-00-00-0E-1E-04-95-EF
Port iSCSI Name: iqn.2000-04.com.qlogic:isp8214.0 SFP not installed
2. Port 1 [Protocol(s): NIC iSCSI FCoE]
MAC Address: 00:0E:1E:04:95:E8
WWPN: 21-00-00-0E-1E-04-95-EB
Port iSCSI Name: iqn.2000-04.com.qlogic:isp8214.0 Online
(p or 0: Previous Menu; m or 98: Main Menu; ex or 99: Quit)
Please Enter Selection: 2
Driver Settings Menu
-----------------------
Target: Display Options
-----------------------
1: Present persistently bound target(s) plus
any new target(s) with driver default (Current)
2: Present persistently bound target(s) Only
-----------------------
Target: Binding Options
-----------------------
3: Bind by World Wide Port Name (Current)
4: Bind by Port ID
5: Commit Changes
To Next Page
Need help?
General
