Qlogic QConvergeConsole CLI 2400 Series User Manual

5–Fibre Channel Noninteractive Commands
-ha (Set | Delete HBA Alias)
SN0054667-00 C 5-15
For example, typing qaucli -pr fc -l -h shows the following:
Using config file: G:\Program Files\QLogic
Corporation\QConvergeConsoleCLI\qaucli.cfg
Installation directory: G:\Program Files\QLogic
Corporation\QConvergeConsoleCLI
Working dir: G:\Documents and Settings\user1
QLogic FCAPI
v1.7.3 Build 38
Copyright (C) 2003-2011 QLogic Corp.
All rights reserved.
QLogic FC/FCoE Common Library
Build Type: Release
Build Date: Dec 7 201x 13:44:03
LUN list.
USAGE:
Displays all LUNs information of all devices attached on an HBA port.
scli -l <hba instance>|<hba wwpn>
Displays all LUNs information of a device attached on an HBA port.
scli -l <hba instance>|<hba wwpn> <target wwpn>|<target portid>
Displays a specific LUN information of a target device attached on an HBA port.
scli -l <hba instance>|<hba wwpn> <target wwpn>|<target portid <lun id>
Options
<hba instance> The HBA instance number of an HBA port.
<hba wwpn> The World Wide Port Name of an HBA port.
<target wwpn> The World Wide Port Name of a target device.
<target portid> The Port ID of a target device.
<lun id> The Logical Unit Number of a LUN.
-ha
(Set | Delete HBA Alias)
With this command you can view, set or delete the alias of a specific adapter.
To view the alias of a specified adapter, issue the following command:
# qaucli -pr fc -ha (<hba instance> | <hba wwpn>) view | info
NOTE:
To view the current version information for QConvergeConsole CLI, issue
the -v command described in “-v (Display Version)” on page 5-35.

Qlogic QConvergeConsole CLI 2400 Series Specifications

General

Brand	Qlogic
Model	QConvergeConsole CLI 2400 Series
Category	Software
Language	English